MakerSpot RPi Raspberry Pi 2 Pi 3 A+ B+ Proto Breadboard PCB Prototyping Board (3 Pack)

Pros:* Raspberry Pi 3 is great and standard* Heatsinks are easy to apply* HDMI cable is pretty standard* Power cable is AMAZING due to its on/off toggle (the pi doesn't have a power on/off by default* USB adapter for microSD card is very helpful for setting things upCons:* The case is very tight around the microSD slot* No instructions (most of it is fairly obvious, but still...)So in setting up the raspberry pi, you might need to move the microSD card back and forth from your computer to install operating systems or edit configurations. If your pi is in the case, then it is VERY difficult to remove the microSD card. The opening is very narrow - meaning it is basically impossible to reach in with your fingers to remove it. I wasn't even able to get my needle-nose pliers in there to remove it. Luckily, I found that you can take rather sticky tape and place that on the card to be able to pull it out with the tape. While the case design made it difficult - I had a workaround, so I wasn't too put off. And knowing that the case makes it difficult, I removed my pi from the case so until I knew I was done moving the SD card. After a few more configuration changes, I'm finally ready and I attempt to put my pi back into the case. Little did I know that you CANNOT put the pi in the case while the microSD card is in. Attempting to do so cracked the microSD card.So now I need another microSD card due to the poorly designed case. Bleh. Everything else is pretty good though. But perhaps look for a different case.

Great product for the price! I got three for the price of a brand name board. I didn’t even have to solder, which is worth every penny. I suck at soldering and it always comes out messy for me.

- quality is good- i would buy another one- using the pi hat to hold a RTC and shutdown btn and restart btn- with a tiny mod it will fit into a canada raspberry pi kit transparent case (have to remove an 1/8 of inch pcb along a 1 inch strip...i used a drill press with a small grinder bit, it took 2 minutes)

Made life a lot easier in building my school's bell controller.

Great product! Unfortunately, I received a case that didn't fit my Raspberry pi. But Makerspot provided me with a replacement and I'm really thankful for that!

I love this, wish I could purchase more of the standoff connectors, but I have yet been able to find a vendor that has them.

Again not exactly what I was looking for but will make do

Best starter kit ever..

Everything arrived quickly and is now operating successfully as a VPN server. All the pieces were as expected. One star deducted because the SD card comes packaged stuck to a paper with glue that left residue on the card. Also it didn't work out of the box because the SD card has a file size error. I re-imaged it myself as I was planning to do anyway and then it worked fine, but it would not have worked for someone expecting plug and play.

For the price did not expect a UK pi3 model B but a knock off. Great deal with what you get, only upgrade needed is a fancy case. As is you need nothing to start retropie other than some USB or wireless controllers (I used real ps3 wireless controllers and they work great - no cords so I can play my retro games from the comfy couch and even turn the unit on and off from the controllers)

Loved how well laid out the board was. It fit every thing I needed with room to spare.

Made in China not as what is shown in the pictures that it's made in the UK.

Bonne qualité